close menu
The KERBL Easy Heat is a German engineered powerful milk heater, which is sturdy and easily cleaned. The KERBL Bucket and Churn Milk Heater features an adjustable thermostat, which will maintain a constant temperature while heating the milk and automatically cut off when the milk has reached the desired temperature, this ensures the heater will never burn the milk. The KERBL Easy Heat Milk Heater has been optimised for use in cylindrical containers with an average diameter of max. 22 cm and for volumes of liquid of up to 10 litres. In the event of any deviating conditions, a longer heat-up time may be required and there may be temperature deviations. The Easy Heat 23A device cannot be used as a temperature measurement device. The milk heater uses a very powerful 1700w heater and is ideal for heating small to medium amounts of milk or milk replacer. The round designed heating element and stand pipe are manufactured from high quality stainless steel, this makes the heater easy to clean and highly hygienic
Directions for use:
Before connecting the plug to the socket, place the device in the liquid to be warmed. Note the maximum and minimum immersion depth of the device, that is marked on the immersion tube. Ensure that the container with the liquid to be heated stands securely on level and stable ground, so as to prevent the device from falling over.
Heating the liquid
Turn the control dial to the desired setting. To start the device, connect the power cable to the socket and the device will begin to heat. The red check light indicates whether the heating element is actually heating.
The heater switches off and the control light goes out upon reaching the target temperature. The heating duration depends upon several factors such as the initial temperature of the liquid, the set target temperature, the ambient temperature, the amount of liquid, and the shape and insulation of the container. To bring larger amounts of liquid to a uniform temperature, the liquid must be circulated manually if necessary. The red check light indicates whether the heating element is actually heating. If the Fast Heat device continues to be left in the container, the liquid will be re-heated again when the temperature drops so as to ensure that the pre-set target temperature is maintained (heat retention mode). To switch off the device, turn the control dial to the “0” setting and then pull the connection cable out of the socket.
Features:
*** This product can only be shipped within ROI ***
